Q&A Frequently asked questions and answers

We have compiled a list of frequently asked questions and answers about the Neino Action Cam Holder.

Q.1
How do I remove the double-sided tape once it has been applied?

A.1
Peeling procedure
1. Heat with a hair dryer:
Run a hair dryer over the entire tape for a few minutes to warm and soften the adhesive.
Note: If the material is heat sensitive, be careful not to overheat it.
2. Peel off slowly:
Once warm and softened, slowly peel off the tape starting from the edge.
point:
Instead of pulling the tape, peel it off slowly, parallel to the surface of the device.
3. Dispose of remaining adhesive:
Hand cream or dish soap: Rub some hand cream or dish soap on the tape residue to allow the oils and moisture to dissolve the adhesive.
Special remover: A remover designed for removing stickers is also effective.
4. Scrub with a spatula or ruler:
Use a spatula, ruler, or cloth tape to scrape off any remaining adhesive.

*Two sets of 3M double-sided tape are included with the product.
*Once removed, the double-sided tape cannot be reused.

Q.2
Is the mount base sold separately?

A.2
This site is the only one that sells " mount bases only " products, excluding general-purpose parts. Please feel free to use them.
(The mount base is not sold separately on other sites.)